I have an Amiga 500 with an revision 6 motherboard

1 Mb "FAT" Agnus chip

High resolution Denise Display Chip

Built in kickswitch with Kickstart 1.3 /2.04/2.05

Self made boot switch to boot from every diskdrive i want.

Self made switch to choose between 512 Kb or 1Mb chipmem

internal 3 1/2 inch diskdrive capacity 720 Kb

external 3 1/2 inch diskdrive

external 5 1/4 inch diskdrive

Supra trackball

Supra turbo 28 Mhz

External Harddrive controller (ROCTEC) with two IDE drives attached and 8Mb fastmem configured in it.

I bought this one about 7 years ago and all is still working fine (except the Powersupply for the roctec controller it died a few weeks ago)

This Oldie is an Apple II computer it is stil working fine

Here are some cables that are lying behind my desk at the attic

This is an HP Deskjet 510 Inkjetprinter, still working very well

Next to it stands an empty minitower I use it to power my Conner tape backup device

This is also an old one an Olivetti tower 20Mhz computer with an

MDF ineternal harddisk of 120 Mb but still working. I use this machine to convert files from and to my Amiga 500.

It has Windows for Workgroups running on it !!!!!! It is also connected to my Lan.

Here stands my Pentium 60 computer (the one i work with)

I stands in the living room and i made a patch to the attic to connect it to my other computers.

It is running Windows for workgroups an Windows 95

It has 32 Mb memory

10 speed cd rom drive

soundblaster 32 card

an vesa Local bus IDE cache controller with 4 Mb of memory

an Reveal 500 Video Capture/Editor card

17 inch Compaq monitor

4 IDE diskdrives built in Total capacity 4 Gigabytes

An ethernet card

on top stands an Microcom Deskporte fast 28k8 modem

Underneath my Pentium stands an Mustek 600 SEP scanner

an Akai Stereo video recorder (to record the edited Video files i make on my computer)

and an JVC DAT recorder to record or play the music i edit on my computer.

Here is an video capture where i was editing my homepage.

Here are some of the boxes with games software i have

And here the second part of the cabinet with software

There are no pictures yet of my other to computers

an icl 25 mhz (connected to the lan with two 1 1/2 Gig disks attached to it

and a 486 40 Mhz that is also connected to my network

These two machines i use to store my data from my pentium and are both connected to my deskjet printer

via an automatic printerswitch.